Parasound NewClassic 275 V2 Two-Channel Power Amplifier

Sale price$849

Parasound NewClassic 275 V2 Two-Channel Power Amplifier

Low profile great power

Features

  • 90 watts x 2 into 8 Ω (all channels driven)
  • 150 watts x 2 into 4 Ω or 2 Ω (all channels driven)
  • 200 watts x 1 bridged into 8 Ω or 4 Ω
  • 20 amps peak current per channel
  • 2 Ohm stable operation with load selector switch
  • Two pairs of speaker outputs with front panel A/B buttons
  • Rear-mounted lockout switch disables front A/B buttons
  • High pass filter, switchable for 20Hz or 40Hz
  • Automatic on/off by DC trigger with looping output
  • Automatic on/off by audio signal with 2 sensitivity settings
  • Fully discrete circuitry with high current toroid transformer
  • Bridging switch for stereo or mono operation
  • Efficient, low heat design
  • DC Servo and relay protection circuits
  • Rear-mounted left and right gain controls
  • Standby, channel status and high temperature indicators
  • Gold-plated RCA input jacks
  • Heavy duty 24k gold-plated 5-way speaker terminals
  • 115/230v selector on rear panel
  • 1U rack mount kit available separately (Model RMK11)

Specifications

Power Output - (RMS power, 20 Hz - 20 kHz) All Channels Driven
90 watts x 2, 8Ω
150 watts x 2, 4Ω
150 watts x 2, 2Ω (Load switch set to 2-3Ω)
Bridged Mono 200 watts x 1, 8Ω
200 watts x 1, 4Ω (Load switch set to 2-3Ω)
Current Capacity 20 amps peak per channel
Frequency Response 20 Hz - 50 kHz, +0/-3 dB, 1 watt
Dynamic Headroom 1.3 dB
Total Harmonic Distortion 0.35% at full rated output
0.025% at average listening levels
IM Distortion 0.05%
Transient IM Distortion Not measurable
S/N Ratio 110 dB at rated output, IHF A-weighted
103 dB at rated output, unweighted
93 dB at 2.828 V output, IHF A-weighted
84 dB at 2.828 V output, unweighted
Input Impedance 33 kΩ
Input Sensitivity 800 mV for full rated output (28dB)
Inter-Channel Crosstalk 80 dB @1 kHz
72 dB @10 kHz
65 dB @ 20kHz
Damping Factor Over 150 at 20Hz
12V Trigger Turn On DC 9 - 12V, 15 mA
Audio Turn On Quieter: 1 mV
Louder: 6 mV
AC Power Requirement 110 - 120 V / 220 -240 V, 50 - 60 Hz
0.5 watts standby
25 watts Idle (no audio)
350 watts full output
Dimensions 17-1/4" Wide
16" Deep, with cables connected
2-1/2" High with feet, 1-3/4" panel only (1U)
(437 x 406 x 63mm, 44.1 mm panel only)
Net Weight 20 lbs (9.1 kg)
Rack Mount Accessory May be Purchased Separately
RMK11

Description

Parasound NewClassic 275 V2 Two-Channel Power Amplifier

Low profile great power

Features

  • 90 watts x 2 into 8 Ω (all channels driven)
  • 150 watts x 2 into 4 Ω or 2 Ω (all channels driven)
  • 200 watts x 1 bridged into 8 Ω or 4 Ω
  • 20 amps peak current per channel
  • 2 Ohm stable operation with load selector switch
  • Two pairs of speaker outputs with front panel A/B buttons
  • Rear-mounted lockout switch disables front A/B buttons
  • High pass filter, switchable for 20Hz or 40Hz
  • Automatic on/off by DC trigger with looping output
  • Automatic on/off by audio signal with 2 sensitivity settings
  • Fully discrete circuitry with high current toroid transformer
  • Bridging switch for stereo or mono operation
  • Efficient, low heat design
  • DC Servo and relay protection circuits
  • Rear-mounted left and right gain controls
  • Standby, channel status and high temperature indicators
  • Gold-plated RCA input jacks
  • Heavy duty 24k gold-plated 5-way speaker terminals
  • 115/230v selector on rear panel
  • 1U rack mount kit available separately (Model RMK11)

Specifications

Power Output - (RMS power, 20 Hz - 20 kHz) All Channels Driven
90 watts x 2, 8Ω
150 watts x 2, 4Ω
150 watts x 2, 2Ω (Load switch set to 2-3Ω)
Bridged Mono 200 watts x 1, 8Ω
200 watts x 1, 4Ω (Load switch set to 2-3Ω)
Current Capacity 20 amps peak per channel
Frequency Response 20 Hz - 50 kHz, +0/-3 dB, 1 watt
Dynamic Headroom 1.3 dB
Total Harmonic Distortion 0.35% at full rated output
0.025% at average listening levels
IM Distortion 0.05%
Transient IM Distortion Not measurable
S/N Ratio 110 dB at rated output, IHF A-weighted
103 dB at rated output, unweighted
93 dB at 2.828 V output, IHF A-weighted
84 dB at 2.828 V output, unweighted
Input Impedance 33 kΩ
Input Sensitivity 800 mV for full rated output (28dB)
Inter-Channel Crosstalk 80 dB @1 kHz
72 dB @10 kHz
65 dB @ 20kHz
Damping Factor Over 150 at 20Hz
12V Trigger Turn On DC 9 - 12V, 15 mA
Audio Turn On Quieter: 1 mV
Louder: 6 mV
AC Power Requirement 110 - 120 V / 220 -240 V, 50 - 60 Hz
0.5 watts standby
25 watts Idle (no audio)
350 watts full output
Dimensions 17-1/4" Wide
16" Deep, with cables connected
2-1/2" High with feet, 1-3/4" panel only (1U)
(437 x 406 x 63mm, 44.1 mm panel only)
Net Weight 20 lbs (9.1 kg)
Rack Mount Accessory May be Purchased Separately
RMK11

Free shipping

Free worldwide shipping and returns - customs and duties taxes included

Customer service

We are available from monday to friday to answer your questions.

Secure payment

Your payment information is processed securely.

RockOnAV Carries the Ultimate Selection of Audio and Video products.

Elevate Your Home Audio Setup!

Transform your home into a personal sanctuary with high-quality audio that enhances every moment. Investing in a robust home audio system elevates your entertainment experience, allowing you to enjoy your favorite music, movies, and podcasts with stunning clarity and depth. 

Before

After

Drag